Skip to main content

Reply to "MTH Z 4000 ISSUE ????"

OK gentlemen.....what's the go.

Are these Z4000 transformers built to only start operating at approx. 9V???

I have tested both sides of both Z4000 transformers I have, and they are all the same......nothing till about 9V from zero upward. Have I purchased two "dud" transformers from Stouts??

Is there a "fix" to get the Z4000 to start supplying power at 2V, like my Z1000 does??

Gunrunner John......should I use the Proto-Sound reset chip (pictured below) on the three diesels and one steamer that appear to be hyper sensitive to the requirement for a gradual drop in voltage below the 9.5V the Z4000 can only deliver?? 

DSC02825DSC02826

Peter.....(Buco Australia)

Attachments

Images (2)
  • DSC02825
  • DSC02826

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×