Skip to main content

Reply to "MTH Z 500 Transformer has constant 18 Volt output."

90 percent of the failures in a Z-Controller is a failed (shorted) TVS.  You can clip one lead and see if voltage control is restored.  If so, replace the TVS.  A spike in voltage usually takes them out.  It's the Diode shaped device bridging the two silver pads at the bottom of GunnrunnerJohn's photo.

Last edited by Jon G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×