Skip to main content

Reply to "My Big Boy is Home"

@Ukaflyer posted:

I had the same issue on mine. The problem was that the four cam lobe on one axle that the micro switch operates on has one lobe slightly undersize to the others. I had to give the lever on the micro switch a slight adjustment down so that it made contact with all lobes.

Yes, I have heard of that, I looked at mine but decided I would not tackle the job. Good decision on my part as Ed found the cam to be cracked and replaced it with a 3d printed cam and adjusted the switch.

Francine and Chuck, thanks for the kind words, I'll have to watch for those bottles🤔

Ray

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×