Skip to main content

Reply to "My First MTH RailKing Building!"

@paulp575 posted:

Just received my first MTH RailKing building and need to know what the power requirements are.

No instructions included, but there are 2 clips on the bottom with 2 small wires. While I know how this works, what's the voltage requirement? Can I connect it to my transformer and if I apply full power (up to 18 volts) will that be too much? If too much, how much?

In the future I will have the Z-1000 connected to the TIU and AIU so I'm sure doing it that way will all be correct.

If using the Z-1000, simply wire to the "14v Accessory port". 

Attachments

Images (1)
  • mceclip0

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×