Skip to main content

Reply to "Narrow Version of DIY 317 Voltage Regulator Board, with Build Files"

TedW posted:

Guys, addressing my ignorance, what are some uses/applications for the “common ground” option of these pcbs?  Why would I need to do this?  Thx Ted

photo hi-jacked and modified from previous OGR thread

isolated rail 4 channel common AC DC ground

In addition to rolling-stock, it could be used track-side if you use/need insulated-rail relays for signals, crossing gates, etc.  It's just that off-the-shelf relays run about $10 each (plus shipping).  But using Rod's board configured for half-wave common-ground with 12V DC output, you could use transformer AC Accessory voltage (e.g., 16V AC) with a 1, 2 or 4 channel 12V DC relay module from eBay free shipping from Asia.  The relay modules are less than $1 per relay so you could rack up some serious $avings!

Attachments

Images (1)
  • isolated rail 4 channel common AC DC ground
Last edited by stan2004

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×