Skip to main content

Reply to "Need advice re: Lionel Ploar Express set # 6-84328"

If the chuffing was working before you took the smoke lever out and now it's not, I wouldn't think it would be the board. Check for a loose plug on the circuit board, loose plug for the sensor  and on/off switch. Possible pinched wire at the sensors, Is the blade paddle dropping down to cover the sensor and then clearing them? Defective on/off switch. Usually when the boards go bad, nothing works.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×