Skip to main content

Reply to "Need Help Finding Train America Studios TAS Tach Reader Board"

Sometimes this assembly comes loose.  There are three wires attached to the board.  I had one model, one of the wires broke off or was not soldered properly.   Tach strip can be secured with an additional scotch tape applied over the tach strip.  As the models progressed, the flywheels were built with the tach strip.  

Last edited by Mike CT

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×