Skip to main content

Reply to "Need help modifying a PS1 smoke unit for PS3 upgrade"

You remove the 3 wires and base electronic board.  Not needed.  Then ensure the resistors are in parallel by soldering the joint of the two elements as in the instruction.  Just make sure that once done you do not have a path to chassis ground by checking the continuity between element and the screw.  Can't remember if the light was using smoke house ground.  If so it has to be removed.  You just want the two elements isolated from anything else.  G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×