Skip to main content

Reply to "Need Help w/ Lionel Passenger Car"

Thanks everyone for your help.

I looked at the masking tape idea but there just is not enough room for the trucks to pass by the skirts.  I did figure it out. If you remove the underside detail (die cast) and the 4 screws under the trucks, the bottom plate (frame) will drop down just enough to slide the car interior out one end of the shell. When all is assembled, it looks like the frame is inside the shell channels. Not the case...all good now.

 

Thanks again!

 

Doug

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×