Skip to main content

Reply to "Need help with roundhouse doors"

Donald,

Thanks so much for your advice.  My doors look exactly like your’s, but they are either wood or some sort of pressed fiber material.  I am now convinced that I do not need operational hinges as I prefer open doors in order to view the engines.   By the way, I also had to deal with warped walls.  One of the large sidewall sections was warped inward about 1/4” and a back wall section warped as well.  Had to clamp a stiff board to the sidewall section to hold it true while using hot glue.  However, hot glue could not hold it, so I reclamped it, used Gorilla glue, and placed support beams across side to side.  So far, that is holding.  Warped back wall section remains warped as I found no way to clamp it.  The warped sections prevented me from assembling a perfectly symmetrical RH.

Last edited by BILL HUDSON

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×