Skip to main content

Reply to "Need Help with toggled siding causing short"

If you are using lighted toggles, they have to have a ground connection to light when turned on. Many connect to ground when turned off. When one pickup roller on a car reaches the "off" siding, there is a direct connection to ground through the car from roller to roller. Does this happen if the siding is powered? You can check the switch with an ohmmeter to see if that is the case. I have about 20 lighted rocker switches of which I only found one that wasn't configured this way.   I discovered this by accident, when I had an engine bridge the gap because I forgot to throw the switch. Took a while to figure it out. You may have a different problem, but it turned out to be mine.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×