Skip to main content

Reply to "Need tips / advice on attaching Snowplow on Scale / 2-rail, MTH or Atlas Premier SD70ACe"

@AGHRMatt posted:

I have an SD70ACe with a low plow. From the angle, it appears that the chassis (stamped steel) is slightly bowed. Not enough to cause derailments, but enough for the plow to sit low. I'd remove the chassis and give it a slight bend. I haven't done the errant one I have as I like it without the plow, but eventually I'll do it.

Matt,

Thanks for your advice.

I haven't looked closely at the chassis yet but if it were bent, would I have to disassemble the model to straighten it?

Naveen Rajan

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×