Reply to "[Answered] Need to Update my Wiring Schematic"

@paulp575 posted:

@AcelaNYP - So with this wiring:

I'm presuming I would do the following:

For conventional: Place the loco (or motorized unit) on the track and then slowly raise the throttle to the desired speed.

For MTH PS locos: Set the loco on the track and raise the power to 14-18 volts. Then use the DCS remote to control the loco.

For Lionel Command/Control (Legacy/TMCC): Set the loco on the track. Then use the Lionel (or MTH) remote to control the loco (I prefer to use the MTH DCS remote for all my command/control locos; to me it seems to be much easier).

Is this correct?

Correct.

-John