Finished up laying track plus ground/power in the yard. Next W/E I will wire the non-derail and the two cross over turnouts. I have one track that doesn't look straight which I will have to fix plus for some reason the switched spur all of a sudden does not turn on so I will have to figure out what is going on there (probably pulled a wire loose crawling under the layout).
A while back I bought four cheap LED dwarf signals from Hong Kong (see photo below). I am going to try these with a DZ-1008 relay and see how they go. The signals come with a resistor attached so it should be a straight hookup.
I also bought a Gargraves gantry track (see photo). I had already built a gantry that would ride on rails however as you can see it is too wide for the Gargraves track. My plan is to use the existing gantry up front and build another one that will fit the Gargraves track.
It is hard to see but the dwarf signal is towards the middle of the photo.
The new Gargraves gantry track
My gantry is too wide for the gantry track so I will use it either up front or in the back depending on fit.
