After performing the bench testing I decided to turn on the power to the existing turnouts and dwarf signals. Should not have done that. The two new DZ-1008 relay I wired in to replace the two previous ones for the cross overs stopped working. This is after I wired according to D. Zanders instruction sheet below
That's 4 in a row now. Not sure what is going on. It seems they blow on power turn on. I am using a CW-80 accessory tap set at 13.6VAC. The 1008 is rated for 24VAC.
I am going to wire in another one for one crossover but also an Atlas snap relay for the other crossover and see what happens.
Joe