At this point I disconnected all feeders from the both of the 50-1014 terminal blocks. Each terminal block is separately connected to #1 & #2 transformer output No load, the transformer handles worked fine independently increasing their respective voltage when the handle (s) is (are) actuated. . I connected 2 track terminals that are next to each other to 2 points on Terminal Block #1. Everything appeared to be in order. No feedback to the other voltage display. Increase voltage on variable voltage #1 has no affect on the other handles voltage reading. As soon as I connected another track terminal to Terminal Block #2 the voltages occur on the displays at the same time. All other terminals are disconnected. Is there something with the Atlas switches and how there rails are wired from the factory?
|