Skip to main content

Reply to "New Lionel FA's"

Dkokoszka posted:

To program the Universal Remote with the ABA units do you program each separately  as engine 1 or

do you put all 3 units on the track first and then assign as engine 1?

Thank you.

With the Universal Remote, the units do not have to be programmed. The RUN/PGM switches should all be in RUN. Place all units on the track, turn on the power, and with the Universal Remote just press the number channel you want them on and it'll connect.

If the channel of the Universal Remote has an engine previously stored on it, you have to clear that channel first. Press the channel and hold the button down until the LED flashes rapidly and then goes off. The channel is then clear. Then press the button again and it will search for the powered up ABA units and connect to them. Once connected, the LED on that channel will turn solid.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×