Skip to main content

Reply to "New Lionel Legacy 10 Wheeler Shorting issue (Fixed)"

Dave, this is a typical setup. The insulators can be slightly different depending on the roller assembly but the insulators should lock in place plus be molded to keep the barrel nut from rotating. Both screws use the same nut and if one is too long they will touch and prevent one or both from being fully tightened.

imageimage

Pete

Attachments

Images (2)
  • image
  • image

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×