Skip to main content

Reply to "New member need advice"

Thanks, that was very kind. Had to go get my book, but terminal 1 & 2 jumpered on J6 is 8 amps. The picture appears to show the correct jumper for 8 amps. There is also a 4 amp setting which is the default with no jumpers (and also a 12 amp and 15 amp setting). I believe it was CapPilot that had 2 PH-180s, T400 and was using the 15 amp setting, he required the large choke that GRJ helped with.

I guess the next question would be what is being used for power here?

FWIW, I have never tested my PSX-ACs with anything but the PH-180s and the 8 amp setting. This combo has worked out very well for me at these settings. However, I'm not sure what happens when you set the PSX to 12 amps (next upward setting) with the PH-180? Also, I am not sure what would happen with the 8 amp setting being used with a lower amperage power supply like a Z1000, Z750 or Z500 brick? 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×