Skip to main content

Reply to "New Millhouse River Turntable Install - Detailing Finished !!"

Richie:

Probably not going to like these ideas unless you plan on keeping the turn table 'forever'.

1. If you can find someone - have them remove the mounting tabs and reattach lower or on the bottom of the turn table or

2. Remove the tabs completely. Screw a plywood 'bottom plate' under the hole in the layout, cut out a round 'shim' from 1/4 plywood and glue the turn table in place.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×