Skip to main content

Reply to "New MTH CP Christmas Stage Boxcar Up in Smoke"

Pictures of the board would help, but it sounds like a typical fixed voltage DC power supply.  The power device is probably a three-terminal fixed voltage regulator, a picture of the lettering on that part would probably tell the tale.

GRJ - Attached are photo's of the board.  The IC is a 7806A voltage regulator.   I'm guessing it's a 6 volt regulator used in a constant current mode.   The board damage is in the area of the regulator input and the bridge output, plus side.

On a relook, nearest I can tell the regulator center pin is connected to ground.  The resister appears to be in series between the regulator output and the LED connectors.

So, the regulator outputs 6 VDC and resistor is the LED dropping resistor ?  So how are the LED's interconnected, in parallel ?

Attachments

Images (2)
  • 20210210_145407
  • 20210210_145429
Last edited by shorling

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×