Skip to main content

Reply to "New MTH Smoke unit problem"

From the posts above, glad I didn't send my RS-3 in yet.

I lowered the smoke volume setting on the DCS remote. I inspected inside the RS-3 shell and it still looked like new. I added MTH reflecting tape strips to the shell where the smoke unit is located just in case. This reflective tape is used in subway shells over the lighting. MTH gave me a bunch of sheets in an attempt to correct the R40 buckling vent issue, which had no bearing on the issue. Brass vents were made too long, buckle with cool temp, flatten out when heated up by the lights. I had to be cut and superglue the vents on the original set. Still flat after all these years.

If I have to send the RS-3 back to the dealer, is shipping covered both ways by MTH?

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×