Reply to "New Project - Rural Grain Elevators Update 05-07"

Jerrman:

Try below

To make the building front I cut 18 different pieces of plastic. To make sure the openings for the windows are correct I use the window itself as a spacer when gluing the piecewise together (see below)

So I will cut pieces 2 and 3 then use the window to determine the widths of 6, 9, 14, and 17 - glue 6 and 9 to 2 and 3 then move the window down for piece 14. Note a smaller window goes between pieces 6 and 1. I would glue this section first. I was fortunate that the top window was the same width but only shorter otherwise more plastic pieces would be needed.