Reply to "New Project - Rural Grain Elevators Update 05-07"

Joe Fauty posted:

Jerrman:

Try below

To make the building front I cut 18 different pieces of plastic. To make sure the openings for the windows are correct I use the window itself as a spacer when gluing the piecewise together (see below)

 

So I will cut pieces 2 and 3 then use the window to determine the widths of 6, 9, 14, and 17 - glue 6 and 9 to 2 and 3 then move the window down for piece 14. Note a smaller window goes between pieces 6 and 1. I would glue this section first. I was fortunate that the top window was the same width but only shorter otherwise more plastic pieces would be needed.

got it, joe. thank you for taking the time to post this other explanation.