Skip to main content

Reply to "NJCJOE's New Train Room - 02/22/24 - Installation of Truss Bridges"

Hi Joe,

I used the same method for running the wires under my layout too,PVC pipe hangers. One thing i did different is take one screw out , let one side remain open so you can slip the wires right into the hanger. Much easier then pulling them through each hanger. Once all wiring is done , then put the other screw in.

Alex

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×