Skip to main content

Reply to "“No engine to add” Solved! Thanks to G (again!)"

If an engine runs with out sound conventionally and it is not the speaker.  Check the volume pot, must have 0 ohms between gray and red wire.  Otherwise a reset.  If that does not work, could be a bad audio amp.  As far as adding to DCS, do a recover engine.  Easy for the 5V boards to get a faulty address when battery is low/dead.  G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×