Skip to main content

Reply to "No Power/Movement after DCS Startup"

Kevin,
quote:
When placed on a conventional track, the tender starts up, but there is no movement, motor operation in response to increased voltage.
Check to see if the 4-pin plug with the two motor wires has become disconnected, or if there's a break in one of the two wires.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×