Skip to main content

Reply to "No Power/Movement after DCS Startup"

If you have a DC transformer, you can disconnect the motor leads from the PS-2 board. Apply the dc power to the motor terminals and see if the motor turns? If it does, the motor is most likely fine. If you have a VM with a current setting, I put that in series with one of the wires to the motor and read the amperage on the motor during the test. G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×