Skip to main content

Reply to "No Power/Movement after DCS Startup"

I bought a voltmeter. Started up the engine with DCS, horn, sounds, smoke all worked fine. Voltmeter registered minimal/no voltage when measured at the two wires connected to the motor with speed set to 0. When speed was increased, volts to motor increased up to 18. Tried the same after reversing direction, same measurements. Does this mean the motor is bad? Is this something that can be ordered from MTH?

Thanks

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×