Skip to main content

Reply to "No smoke from MTH CP SD90???"

Trace purple and brown wires from the smoke element PCB back to the 4 pin connector on the PS-2 board for continuity.  Make sure any 2 pin connector between smoke element and board is fully installed, no pins pushed out.  After that try a factory reset.  After that board needs to be tested for a bad fet.  G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×