Skip to main content

Reply to "Non Derailing Connections Causing Switch Confusion"

@CAPPilot posted:

I have had issues with my #6 switches when the two rails where the blue arrows are pointing are touching, either the rails or the spikes.  Not sure if regular switches have the same issue, but check there.

That must have been the problem. I had removed the spikes at those ends, thinking that I had taken care of that problem, but the actual rail tips must have still been touching. I took a small flat blade screw driver and stuck it between the tips and rotated it both directions to push the apart as much as I could, and now the flutter is gone, and the non-derailing works as it should. I just need to revers the green wires for the yellow wires as it is operating backwards.

Thanks for convincing me to take a closer look at that area.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×