Skip to main content

Reply to "NOROLK & WESTERN J CLASS 4-8-4 LOCOMOTIVE AND TENDER 6-38026"

The OP stated he was running conventional, therefore this likely doesn't have anything to do with TMCC or Legacy.

You've likely set the conventional speed control on your locomotive, which you'll need to deactivate. For some reason, Lionel doesn't have the manual for your locomotive online, but this is the procedure to follow:

>>>To turn speed control off, get your locomotive into neutral for at least 5 seconds, then increase the track voltage to full power with the throttle on your transformer. This will give you more “room” to lower the voltage. Press the HORN/WHISTLE button on your transformer for 2-3 seconds while lowering the throttle voltage to 1/4 of full power, or at least three volts. The speed control deactivates when it sees a 3 volt change with the HORN/WHISTLE button pressed, regardless of initial voltage level. Do not turn the throttle off, or speed control may not deactivate.<<<

TRW

Last edited by PaperTRW

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×