Skip to main content

Reply to "NYO&W "Mountaineer" #405 project"

@Blake posted:

Prime and lightly sand parts to be painted, mix the paint with laquer thinner , I usually do a 50/50 mix, or the thinner Scalecoat sells, and spray the parts you want to paint, and let dry. I use a siphon fed airbrush, so setup might differ slightly with a gravity fed airbrush. After everything is dried spray a clear coat to seal everything. If using decals, add decals first then clear coat.

That’s how it’s done, ….nice work!….soldier on,…😁

Pat

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×