Skip to main content

Reply to "O-22 Switch Operation Using A Z-1000 Transformer"

As of this point I am in the planning stages of my layout to be.  I have a brand new Z-1000 transformer and an old KW.  I would like to run the trains using the Z-1000, as I am wary of using the older transformer to do so on the newer electronically loaded locomotives.  I'm not running Legacy, command control or anything similar, just some Railing locos and one or two older Lionel locomotives.  

My last layout was back in the '80s.  Then I simply ran older Lionel with the KW and knew exactly how to wire the fixed voltage plugs on my switch tracks.  Things were simple back then.  

I'm trying to avoid any mistakes that might cause damage to my equipment.  Of course, if I decide to use the new Ross tinplate switch tracks, things may be different.  I'm not sure yet, how they operate or get their power, and if they have the non-derailing feature as do the O-22s. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×