@Dominic Mazoch posted:Are your transformers in phase?
The 1033 has what, in what CTT says, a floating ground.
Usually, the U post is ground. But on some transformers, it is hot, the other letters are "ground". Is the 1033 one of these.
Unless you are using some sort of electrical switch, the uncoupling magnet will always be on if the transformer is on.
I appreciate your response. I probably did not make it clear enough. When the train is running and I push the uncouple button on the controller, then two cars will uncouple. Without pushing the uncouple button the train passes over the remote-control track without uncoupling.
