Skip to main content

Reply to "O22 Fixed Voltage.....Again"

I haven't wired these switches in a while, but I think the wires to the track are as follows: terminal U is the ground and goes to the outside rail,  and terminal A would be the power and go to the center rail. Then, the fixed voltage plug would be power and go to terminal B, C or D in the ZW transformer. You apply the power to the switch by using the throttle for terminal B, C or D. The train is controlled by throttle for terminal A.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×