Skip to main content

Reply to "Odd Events for Remotes and Command Base"

@MED posted:

As @gunrunnerjohn wrote, you will have to wait for Lionel.

If you only sent the base to Lionel, and kept the remote at home, I would suggest looking at a couple things. Pages 78 and 79 of the ver 1.6 manual for the 990/991 set show you how to check the binding of the base with the remote - so I would try to check this.

Maybe Lionel updated the base firmware, and now it doesn't match the firmware in the remote. Page 48 says that when you power on the remote with the CTC button, the firmware levels of the base and remote are both displayed.

I know that is something is broken, the above won't do a thing, but just something you can try to pass time till Lionel is available.

When I originally sent the units back I sent the charging base of the 993 and the Command Base of the 990 and Both remotes.  As I explained the Command Base is dead, No Status Lights, No "LIONEL" lights. And I did check the voltage out of the Power Supply and that is nominal.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×