Skip to main content

Reply to "Old PS-2 Premier steamer problem"

if your steam engine has a ps2 5 volt board which is most likely your board is quite old as Dan has said, although sometimes you can do a conventional RESET and recover a board that won't run in conventional but runs ok in DCS , worth a try, otherwise just replace your board with a ps 3/2 board and your old engine will run perfectly and you'll never need a battery also a perk with the newer electronics boards !

As far as the upside down problem you might have binding side rods causing that issue! you might take the engine top off and rotate the flywheel and see if you feel binding which would cause the problem your describing !

MTH PS2 PS3 conventional factory reset using z 4000 and z 750 transformers - Bing video

Alan   

Last edited by Alan Mancus

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×