Skip to main content

Reply to "Operate Lionel's Smoke Fluid Loader through DCS Remote...."

Hi Barry;

Using the DCS Remote, I scrolled the thumbwheel from zero to 31. The arm did not move. I then pressed the Dir key; which reset the speed back to zero. At this point; nothing happened....no movement.

I scroll the thumbwheel from zero to 31 again and nothing moved. I then pressed the Dir key. Again the speed was set to zero and no movement of the arm occurred.

Included below is a link to a YouTube video I created that shows the testing I just did with the Smoke Loader (I created the YouTube vid because my video upload to this message kept erroring out. The file is only 21mb). The video shows me:

1. Turning the pole light On and Off via Aux+8 and Aux+9.

2. Activating the pump by pressing and holding the Brake key. I held the Brake key for 6 "pumps"; which you can hear.

3. Scrolling the thumbwheel up to 31 and pressing the Dir key. I did this twice.

https://youtu.be/OnbwFt6innI

Not sure what to do next.....

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×