Skip to main content

Reply to "Operating Lionel Command Control Accessory with MTH DCS"

Unless Lionel has reconfigured it (and I doubt it has) it should run right out of the box with only 18VAC (track or accessory power) applied to the sawmill terminals, or your sawmill may be defective.  All the MTH AIU is is a box of electrical switches which you attach to a MTH TIU (Track Interface Unit) that transmits instructions from your DCS to your accessories which are attached to an Accessory Interface Unit (AIU), and train engines that receive their control signals from the TIU through the track.

You stated you were using DCS and a WiFi. That implies you are using MTH's hardware (transformers, TIU's, AIU's and WiFi) as DCS is an MTH control system.  It occurs to me that you may only be using a transformer or you have a DCC system which is not MTH.

It would help to know what specific components you are using to run your train. I really think your sawmill may be defective.  It won't be the first accessory to be DOA.

Tom

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×