Skip to main content

Reply to "Operating track problems. Lionel pw"

these posts are good to read. I had problems with the coupler magnet being to weak and that’s cause it was set up to run on existing track power so I cut off both wires to the magnet. one wire direct to 14volts accessory and the other going thru the push button controller then to the other side of accessory no problems with these if they are at least 12volts or higher as reported by lionel

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×