Chris,
It is hard to paint with rattle cans. I only use them for the base coat.
I will use the cheapest rattle can for the base coat. 1-2 light coats. Waiting 6 hours seems crazy to me. Most paints flash within 10-15 minutes. I have a Reznor heater in my shop that I use to force dry in the winter. lol Yes, you can tape that soon. (Watch heating Korber stuff. It moves around quite a bit)
Some tips on taping:
- Stick the tape on your shirt before applying to the model. This will get rid of some of the tackiness.
- Don't press the tape on with a great amount of force.
- Spray another coat of base over the tape edge. If there is bleed through, it will be the same color. This will also seal the edge.
Spraying the second color:
- Do not spray into the edge of the tape.
- Use light coats.
USE AN AIRBRUSH IF YOU CAN. You cannot control the flow or the amount of product with a can.
Remove the tape IMMEDIATELY!