Skip to main content

Reply to "Painting Buildings"

Those are resin kits. I have used blue painter's tape for masking on resin kits without any paint peeling issues. The issue is probably related to not completely removing the mold-release from the resin castings.First, gently scrub with a toothbrush using  mineral spirits or Goo-Gone. Then, repeat the step with liquid dish soap and warm water. Soap and water alone will not remove most resin mold-release agents. After that, use a spray primer as others have said. And, apply a light coat and allow to dry completely before repainting. Do read and follow all the instructions on the spray can--they're provided  for a very good reason!

Last edited by DennisB

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×