Skip to main content

Reply to "PBW needed"

Datasheet says 0.040" +/- 0.003 so perhaps OK.  Do you have a numbered drill-bit set?  #61 bit is 0.039, #60 bit is 0.040", #59 bit is 0.041".   Looks like GRJ confirmed socket can accept the 0.025" square-pins you most likely have.  Yes, if you're only offering a bag of parts requiring soldering then 93 cents for a press-fit socket may not be a good bang for the buck.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×