Version 3.16 of the RTC program is available on my page. Major new addition is the support for Routes and Scenes. You can get it at:
http://www.silogic.com/trains/...ng.html#RTC_Download
Release notes:
1. I added a Super TIU mode selection on the setup window. This is my best guess at how it works but it remains largely untested because my layout doesn't need it. Feedback appreciated. Debug Mode only. If you don't know to get into Debug Mode, contact me. I'll move this out of Debug mode once a few people use it.
2. I did some more testing and fixups on the code which allows the use of Engine #0 - the factory reset engine. You can control, rename and renumber factory reset engines. Debug Mode only. If you don't know to get into Debug Mode, contact me. I'll move this out of Debug mode once a few people use it.
3. I added the ability to create Routes and Scenes. They are not separate things as in the Remote but can contain both switches and accessories. Up to 256 can be created. Each can contain an unlimited number of switches and accessories (although only 500 (250 switches and 250 accessories) can be connected to the maximum 5 AIU on 5 TIU). They can be "Activated" to presets or "Reset" to defaults. Unlike the remote, you set an accessory to turn off when a Scene is activated.
The Route/Scene windows works in a similar manner to the LashUp Window.
Right Click on the Route/Scene window for Help.
4. I cleaned up the operation of the AIU Control window. Now double clicking on an accessory or switch will toggle the state of that device. The state is now shown with a cute Icon rather than works.
5. Added "All" Accessory and Switch operation to the AIU Control Screen. Turns On/Off all accessories connected to the TIU or sets all switches connected to the TIU to straight/diverge. ALL switches and accessories connected all AIU connected to the selected TIU. Debug Mode only. If you don't know to get into Debug Mode, contact me. I'll move this out of Debug mode once a few people use it.
Mark
