Skip to main content

Reply to "PS 1 Locomotive conversion to TMCC Where do all the wires go."

After completely breaking down the locomotive inside the only lamps being powered by the lighting board are the interior lamps which are 6 volts, this is an older locomotive so the cab light stays on. There are no marker or number board lights for the same reason. The only thing I wasn't sure about was the output of the TMCC board which I would have put a meter on but thanks for saving me some time. I could control the cab light by hooking the lighting board to the TMCC module and leave the smoke unit connected to the track power but I haven't decided yet. I will put the appropriate resistor in line with each head lamp and reverse lamp. So far the project is coming along slowly as I have very limited time to work on it but I will post a short video when it is done.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×