Skip to main content

Reply to "Pennsylvania H-10"

Before I apply power I just want to make sure I soldered the YLB to the correct group of wires.  There are 2 wires coming from the proximity of the pick up roller. One is black and I think this is a ground and that connects to 3 other all black wires.  

The one I soldered the YLB to was black with red strip.  It was connected to one black and 2 grey wires. Can anyone confirm this is correct before I apply power?

Do you just use double stick tape to hold the YLB in place at the top of the tender or is there a better location?

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×