Standard sheets of plywood were used. On the left are two 4’x8’s, center is one 4’x8’, right is one 4’x8’ plus a partial that is somewhat hidden. There is a closet behind the sheet of plywood on the right. I cut the plywood down to 38” wide, a length I can comfortably reach across for access. The room is roughly 14’ wide by 24’ in length. I could go longer, wanted to leave room for the steps where I was standing, access to the half bath and door leading out to the garage. We do have to keep a level head. As noted above
There will be a 90 degree crossover by the closet and left side for future expansion, a “hinged” bridge on either side, so there is no crawling underneath, if that makes sense. For now it will remain open in the center.
I agree on the holes for pulling the wires, easily done and a few strategically placed buss bars from MTH will help keep things clean.
Opposite the wall on the right is my unfinished utility room/ canned goods/potato’s storage, so I might, and this is a big might, have a small exit in the far corner only to re-enter by the closet. It would be interesting having track running between Mason jars of garden tomato’s, brandied peaches and other specialties. It would have to be sealed off when not in use.
