Skip to main content

Reply to "Pick Up Roller Tilting & Contacting Wheel Base"

A5005382-B0BE-47E9-9D37-B4A3033C4518785FD33D-59A9-4EE5-B2F2-5F0C16889FF4A quick and simple remedy I’ve done to these cars, as I’ve run into this same problem on a few MTH cars....cut a small square from a piece of heat shrink (the large pieces yield a bunch of “insulators”. Wipe the inside of the pocket on the truck with a cotton swab and alcohol. Put a dab of 5 minute epoxy on the insulator and slide into place...press down on the insulator with the flat side of a screwdriver, or a a xacto knife...in 5 minutes you’re back in revenue service.....hope that helps..........Pat

Attachments

Images (2)
  • A5005382-B0BE-47E9-9D37-B4A3033C4518
  • 785FD33D-59A9-4EE5-B2F2-5F0C16889FF4

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×