Skip to main content

Reply to "Building the Riverdale, Pittsburgh, & Western 10x11.5+ Layout (Updated 11/19/23: Welcome to Western PA!)"

@RSJB18 posted:

Welcome to the forum Tall J. Looks like you've made a good start. The additional bracing on the modules might be a bit of belts and suspenders but it's your RR your Rules. Just remember to drill holes for the wiring before putting the tops on. You will glad you did when you are under the table doing the wiring.

Bob

Yes Justin, the alternative to the holes in the cross braces is to fasten plastic wire clamps to each cross member and run wires through them.  I have already ran more wires than I ever did on a layout and, next time I think I'll go with the holes drilled in the wood like Bob suggested.  Regardless which way you go, plan for more wires than you would think you will need - lots of holes or clamps. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×